RGB Scoreboards

Assembly tutorial for SIZE 4: P5- 128 x 64 pixels. Dimensions: 64cmx 32cm / 25.2 in x 12.6 in

Post Date December, 31 2024

Post by Sagar Sapkota
0 Comments

The SCOREDUINO-ESP32 module is a versatile solution, expertly designed to simplify the creation of various RGB scoreboards. With seamless Wi-Fi connectivity and an intuitive interface via the Scoreduino-ESP32 app, customizing your scoreboard settings has never been easier.

This module provides the flexibility to design an extensive range of scoreboards, from general-purpose boards with timers to specialized ones for sports like football, futsal, ping pong, and tennis.

Our policy is "1 Module - 1 Output" ensuring each module delivers a single, dedicated output.

Whether you opt for a large-scale setup or a portable solution, the modular design enables scalability. Each module comes preloaded with a specific program to generate your desired output from the 20 available options. If additional outputs are needed, you need to purchase a new module.

Assembly tips for all the sizes

Step 1: Prepare the Scoreboard unit. Place the RGB display panels with the arrows pointing upwards. If your chosen size have multiple displays, chain up the displays using IDC cables.

Step 2: Connect the chained displays OR single display to the Scoreduino-ESP32 module.

Step 3: Connect the display panels and the SCOREDUINO-ESP32 module using power cable. Connect the terminals of the power cable to the screw terminals on the Scoreduino-ESP32 module. Power up the SCOREDUINO-ESP32, that will also power up the displays.

Step 4: If you are an iPhone/Macbook/PC user, Connect to ESP32 Wi-Fi Network(Scoreduino-ESP32). Choose the Wi-Fi network- SCOREDUINO-ESP32 from Wi-Fi Settings and Enter the provided password.

Go to your browser and type 192.168.4.1, you will immediately see the control buttons on the browser page. If you are an Android user, operate the Scoreboard using the Scoreduino-ESP32 App(Android).

GUIDE FOR SIZE 4: P5- 128 x 64 pixels. Dimensions: 64cmx 32cm / 25.2 in x 12.6 in

There are four P5 (64x32 pixels) displays required to build the scoreboard.

Place the RGB display panels with the arrows pointing upwards. Connect the two display panels using IDC cable.
Connect the chained displays to SCOREDUINO-ESP32 module using IDC cable
Connect power cables to the displays. RED wire is VCC and BLACK wire is GND.
Connect the power cable terminals to the screw terminals on the SCOREDUINO-ESP32 module OR the screw terminal module.
Power up the SCOREDUINO-ESP32 module using 5V-6A power adapter. The displays panels will get the power via the screw terminals of the SCOREDUINO-ESP32 module
If you are an iPhone/Macbook/PC user, Connect to ESP32 Wi-Fi Network(Scoreduino-ESP32). Choose the Wi-Fi network- SCOREDUINO-ESP32 from Wi-Fi Settings and Enter the provided password.

Go to your browser and type 192.168.4.1, you will immediately see the control buttons on the browser page. If you are an Android user, operate the Scoreboard using the Scoreduino-ESP32 App(Android).

Place the RGB display panels with the arrows pointing upwards.

You can also use the screw terminals on the SCOREDUINO-ESP32 module to power up the display panels.